OmniTurn   CNC Lathes Made in Oregon
 Fast... Precise... Affordable... Home Contact

Repair Parts: Legacy CNC Control Components Feb 2024
See also Current CNC Control Components

Component
Description
Part Number
Price
Component
Description
Part Number
Price
Image of OmniTurn G4 CNC
New Generation (G4) CNC
5hp (with exchange)

New Generation (G4) CNC
C-Axis (with exchange)
915-16-101

965-16-101
$4,995

$4,995
Image of OmniTurn G4 CNC
New Generation (G4) CNC
5hp (with exchange)

New Generation (G4) CNC
C-Axis (with exchange)
915-16-101

965-16-101
$4,995

$4,995

Click image for PDF info

Image of OmniTurn LCD Monitor Kit

LCD Monitor

NOTE: To use LCD monitor with older motherboard requires ISA or PCI video card (VGA). These cards are no longer being made. Call for options.

NOTE: G3 CNC must UPDATE SOFTWARE
995-16-019
$430

Click image for PDF info

Image of OmniTurn LCD Monitor Kit
LCD Monitor

NOTE: To use LCD monitor with older motherboard requires ISA or PCI video card (VGA). These cards are no longer being made. Call for options.

NOTE: G3 CNC must UPDATE SOFTWARE
995-16-019
$430

Click image for PDF info

Image of TF486 Motherboard for OmniTurn G2 or G3 CNC
Motherboard complete (G3 CNC)

We can no longer support this motherboard. You can probably find one that will work online:

Better yet, upgrade to G4 CNC.
 
 

Click image for PDF info

Image of TF486 Motherboard for OmniTurn G2 or G3 CNC
Motherboard complete (G3 CNC)

We can no longer support this motherboard. You can probably find one that will work online:

Better yet, upgrade to G4 CNC.
 
 
Image of AT Computer Power Supply for OmniTurn G3 CNC
AT Power Supply (G3 CNC)
995-16-009
$145
Image of AT Computer Power Supply for OmniTurn G3 CNC
AT Power Supply (G3 CNC)
995-16-009
$145

Click image for PDF info

Image of PS1 Keyboard for OmniTurn CNC
PS1 / AT Keyboard
(G3 CNC)
995-16-001
$175

Click image for PDF info

Image of PS1 Keyboard for OmniTurn CNC
PS1 / AT Keyboard
(G3 CNC)
995-16-001
$175

Click image for install info

Image of Auxiliary Power Supply kit for OmniTurn CNC
Auxiliary Power Supply Kit

Install in older G3 CNC to provide higher 12VDC for more reliable collet-closer operation.

Standard on newer G3 and all G4.
995-09-004
$75

Click image for PDF info

Image of Auxiliary Power Supply kit for OmniTurn CNC
Auxiliary Power Supply Kit

Install in older G3 CNC to provide higher 12VDC for more reliable collet-closer operation.

Standard on newer G3 and all G4.
995-09-004
$75
Image of Servo Amplifier for OmniTurn CNC
OmniTurn Servo Amp, NEW, w/exchange

Reconditioned (90 day warranty)
995-16-007

995-16-007R
$525

$300
Image of Servo Amplifier for OmniTurn CNC
OmniTurn Servo Amp, NEW, w/exchange

Reconditioned (90 day warranty)
995-16-007

995-16-007R
$525

$300
Image of Servo Amplifier for OmniTurn CNC
AMC Servo Amp, w/exchange
Reconditioned (90 day warranty)

For old-style G2 & G3 CNC
995-16-002
$300
Image of Servo Amplifier for OmniTurn CNC
AMC Servo Amp, w/exchange
Reconditioned (90 day warranty)

For old-style G2 & G3 CNC
995-16-002
$300
Image of Servo Amplifier for OmniTurn CNC
Copley Servo Amp, w/exchange
Reconditioned (90 day warranty)

For old-style G2 & G3 CNC
995-16-003
$300
Image of Servo Amplifier for OmniTurn CNC
Copley Servo Amp, w/exchange
Reconditioned (90 day warranty)

For old-style G2 & G3 CNC
995-16-003
$300
995-07-412
$25
Image of Motion Control Card (MC2) for OmniTurn CNC
MC2 Exchange Refurbished
(Motion Card for G3 CNC)

MC2-B Exchange Refurbished
(C-Axis Motion Card for G3 Baumuller)
995-49-001

995-49-004
$1,000

$1,000
Image of Motion Control Card (MC2) for OmniTurn CNC
MC2 Exchange Refurbished
(Motion Card for G3 CNC)

MC2-B Exchange Refurbished
(C-Axis Motion Card for G3 Baumuller)
995-49-001

995-49-004
$1,000

$1,000
Image of Servo Motor Thermal Overload for OmniTurn CNC
Servo Motor Thermal Overload
(G4 & late G3 CNC)
995-15-015
$25
Image of Servo Motor Thermal Overload for OmniTurn CNC
Servo Motor Thermal Overload
(G4 & late G3 CNC)
995-15-015
$25
Image of Refurbished Axis Motor Thermal Overload for OmniTurn G3 CNC (pre-2007)
Thermal Overload w/Heater (refurb)
(G3 CNC pre-2007)
995-15-017
$125
Image of W43 Heater for OmniTurn G3 CNC (pre-2007)
W43 Heater Only (new)
(G3 CNC pre-2007)
995-15-007
$50
Image of Refurbished Axis Motor Thermal Overload for OmniTurn G3 CNC (pre-2007)
Thermal Overload w/Heater (refurb)
(G3 CNC pre-2007)
995-15-017
$125
Image of W43 Heater for OmniTurn G3 CNC (pre-2007)
W43 Heater Only (new)
(G3 CNC pre-2007)
995-15-007
$50
Image of Ice cube relay for OmniTurn CNC and spindle drive
12VDC Icecube Relay (3-pole)
(Located on Connect Card in G3 and G4 CNC's)
999-15-005
$25
Image of Ice cube relay for OmniTurn CNC and spindle drive
12VDC Icecube Relay (3-pole)
(Located on Connect Card in G3 and G4 CNC's)
999-15-005
$25
Image of Solid state hard drive for OmniTurn CNC
Solid-state IDE Hard Drive
(for G3 CNC and earliest G4 w/ML MB)
995-09-003
$125
Image of Solid state hard drive for OmniTurn CNC
Solid-state IDE Hard Drive
(for G3 CNC and earliest w/ML MB)
995-09-003
$125
Image of Monographic video card for G2 or G3 Omniturn CNC
Monochrome Video Card
(For G2 or G3 w/Amber CRT Monitor)
995-17-009
$82
Image of Monographic video card for G2 or G3 Omniturn CNC
Monochrome Video Card
(For G2 or G3 w/Amber CRT Monitor)
995-17-009
$82
Image of Disk Control I/O card for G2 or G3 Omniturn CNC
Disk Controller I/O Card
(For old-style G2 & G3 CNC)
995-16-004
$82
Image of Disk Control I/O card for G2 or G3 Omniturn CNC
Disk Controller I/O Card
(For old-style G2 & G3 CNC)
995-16-004
$82

Click image for install info

Image of OmniTurn Network Interface Kit
OmniTurn Network Interface Kit (Specify G3 or G4)
990-39-100
$250

Click image for install info

Image of OmniTurn Network Interface Kit
OmniTurn Network Interface Kit (Specify G3 or G4)
990-39-100
$250

Click image for install info

Image of USB Floppy Drive Emulator
USB Floppy Drive Emulator
(Provides USB compatibility for legacy CNC)

Includes formatted thumb drive for program backup, plus software to restore your hard drive.

995-16-022
$150

Click image for install info

Image of USB Floppy Drive Emulator
USB Floppy Drive Emulator
(Provides USB compatibility for legacy CNC)

Includes formatted thumb drive for program backup, plus software to restore your hard drive.

995-16-022
$150
Image of USB Thumb Drive for Emulator
Replacement thumb drive for emulator.
995-16-023
$25
Image of USB Thumb Drive for Emulator
Replacement thumb drive for emulator.
995-16-023
$25

Click image for more info

Image of Armature Relay Kit
Armature Relay Kit
(For pre-1998 GT-75 only)

Prevents slide movement if control is shut off w/o first engaging E-Stop.
NOTE:If your Control On switch is Idec (not Baco), then cost is just $60.

995-09-001
$100

Click image for more info

Image of Armature Relay Kit
Armature Relay Kit
(For pre-1998 GT-75 only)

Prevents slide movement if control is shut off w/o first engaging E-Stop.
NOTE:If your Control On switch is Idec (not Baco), then cost is just $60.

995-09-001
$100
Image of RS422 Converter (9-pin) for PLC
Current RS422 Converter (9-pin) for PLC
995-16-026
$40
Image of RS422 Converter (9-pin) for PLC
Current RS422 Converter (9-pin) for PLC
995-16-026
$40
Image of RS422 Converter (25-pin) for PLC
Legacy RS422 Converter (25-pin) for PLC
995-16-011
$77
Image of RS422 Converter (25-pin) for PLC
Legacy RS422 Converter (25-pin) for PLC

Click image for PORTTEST

Image of RS422 Loop-back Connector
RS422 Loop-back Connector
(To troubleshoot communication error)
995-18-003
$25

Click image for PORTTEST

Image of RS422 Loop-back Connector
RS422 Loop-back Connector
(To troubleshoot communication error)
995-18-003
$25

Click image for PORTTEST

Image of PLC Mini-DIN Loop-back Connector
PLC Mini-DIN Loop-back Connector
(To troubleshoot communication error)
995-18-006
$50

Click image for PORTTEST

Image of PLC Mini-DIN Loop-back Connector
PLC Mini-DIN Loop-back Connector
(To troubleshoot communication error)
995-18-006
$50
995-16-011
$77
Image of Connect Card for G2 or G3 Omniturn CNC
Connect Card
(For G2 or G3 CNC)
995-17-002
$256
Image of Connect Card for G2 or G3 Omniturn CNC
Connect Card
(For G2 or G3 CNC)
995-17-002
$256
Image of Pin Extractor for Omniturn CNC
Pin Extractor

(Required for removing pins from AMP connectors used on OmniTurn CNC)

999-03-001
$30
Image of Pin Extractor for Omniturn CNC
Pin Extractor

(Required for removing pins from AMP connectors used on OmniTurn CNC)

999-03-001
$30
Image of Misc Cable for TB1 Spindle Cabinet
Misc Cable for TB1 Spindle Cabinet
994-07-003
$100
Image of Misc Cable for TB1 Spindle Cabinet
Misc Cable for TB1 Spindle Cabinet
994-07-003
$100
Image of OmniTurn Programming and Maintenance Manual
OmniTurn Programming & Service Manual (G3 or G4)

Free download G3 (LEGACY) manual
Free download G4 (Early) manual
Free download G4 (Nov 2024) manual
999-59-001
$50
Image of OmniTurn Programming and Maintenance Manual
OmniTurn Programming & Service Manual (G3 or G4)

Free download G3 (LEGACY) manual
Free download G4 (Nov 2024) manual
999-59-001
$50
OmniTurn  (541) 332-7004 • (541) 332-1018 fax        sales@OmniTurn.com
BACK TO TOP
Back to Repair Parts
Print this page
OmniTurn.com    (541) 332-7004    (541) 332-1018 fax    sales@OmniTurn.com