M60 / M61, Set PLC Output Y3 ON / OFF

See also M64/M65, Set PLC Output Y5 ON/OFF
And M62, Pulse PLC Output Y2, then wait for EoB

M60 can be used to enable bar pusher.

The ladder program in the standard PLC Expanded I/O option includes M-Funtions for setting live tools ON or OFF, and for controlling some automatic bar feeders.

If you want to connect an automatic bar-loader to your G4 OmniTurn, a less expensive kit is available.

If you need a small, fast, inexpensive automatic bar-loader, consider the OmniTurn ZipLoader.