Troubleshoot DMI Pool Error on ZF Micro Motherboard

ZF Micro motherboards were sold as replacements starting about 2010.
To enter CMOS setup, hold the F2 key after you power up.
After "entering setup" prompt, the CMOS main screen should appear.

ZF Micro Splash

CMOS Main Screen

Possible solution for Verifying DMI Pool Data error:

In CMOS Main Screen, with System Time highlighted, use "+" or "-" key to change the time. Press F10 to save CMOS and exit.

CMOS Main Screen

Save & Exit

If the computer gets past the DMI Pool Data screen after reboot, you’ve fixed the problem. If not, it could be something else; email service@omniturn.com for advice.

Back to DMI Pool Error

Back to Won't Boot