M80: Cutoff Cycle (Optional VCO)
M81: Cutoff Cycle (Optional VCO)
M82: Wait for Cutoff Complete (Optional VCO)
M80: Cutoff Cycle
M80 and M81 are two separately programmable cutoff cycles for use with the optional Vertical Cutoff (VCO).
Diameters, feed-rates and dwells are set for each cycle and invoked in program.
M80: Cutoff Cycle
M80 and M81 are two separately programmable cutoff cycles for use with the optional Vertical Cutoff (VCO).
Diameters, feed-rates and dwells are set for each cycle and invoked in program.
M82 Wait for Cutoff Complete
M80: Cutoff Cycle
Other machining operations can be done concurrent with cutoff cycle.
Put M82 before operations that could cause interference untl cutoff cycle is complete; program dwells until cutoff is complete.