OmniTurn   CNC Lathes Made in Oregon
 Fast... Precise... Affordable... Home Contact

 Repair Parts: Additional Components Jun 2023
Comp​onent Desc P/N Pri​ce
Z & X Axis Scales Z Axis Scale 992​-04​-002 $25
X Axis Scale 992​-04​-001 $25
Rubber Way Cover Rubber Way-cover, 8" travel
(cut to fit your 5" travel, if necessary)
392​-11​-002 $30
Accordion Way Cover Bellows Cover for GT-75 & GT-Jr
(Accordion Way Cover)
692​-11​-001 $2​05
Coolant Pump Coolant Pump 696​-16​-001 $3​50
Coolant Pump Mounting Flange 696​-01​-001 $31
Chip Pan Chip Pan w/Perforated Bottom
Includes filter material

Fits GT-75 or GT-Jr
696​-11​-003 $115
Chip Pan Filter Material Chip Pan Filter Material
696​-11​-001 $10
Bolt-Down Kit Bolt-down Kit
To secure GT-75 or GT-Jr to floor when aligned with Zip Loader or bar feeder.
691​-39​-001 $195

Click image for more info

Cycle Start Inhibit Kit G3
Collet Closer Pressure Switch Kit for G3 CNC
Inhibits Cycle Start if collet is not clamped.

(Regulator and Gauge not included)
697​-09​-100 $125

Click image for more info

Cycle Start Inhibit Kit G4
Collet Closer Pressure Switch Kit for G4 CNC
Inhibits Cycle Start if collet is not clamped.
998​-09​-401 $175
Parts Catcher Kit Parts Catcher Kit
(Fits GT-75 only)
491​-39​-100 $1,​000
Work Lamp Instant start, dual fluorescent work lamp kit (includes brackets & mounting hardware) 491​-09​-002 $195
Leveling Pad Leveling Pads for GT-75 or GT-Jr (set of four) 691​-13​-001 $65

Click image for more info

Expanded I/O (PLC) Kit
Expanded I/O PLC Kit: 16 Inputs & 14 Outputs 999​-39​-103 $1,​095
OmniTurn  ​(541) 332-7004 •​ (541) 332-1018 fax        ​sales@OmniTurn.com Print this page
OmniTurn.com    (541) 332-7004    (541) 332-1018 fax    sales@OmniTurn.com