The parts hopper (799-39-101) is designed to be used with the Omniturn Zip Loader to increase the number of parts that can be loaded with the ZipLoader.
The hopper allows small diameter parts (1/8” - 1/2”) to be loaded in quantity in a 3-1/2”h x 11-3/4” x 24-1/8”w box. The length of the part can be from approximately 2 inches, to 24 inches. The parts are then presented to the top of the knife in the ZipLoader, and loaded into the rear of the spindle for machining.
The hopper can be mounted to any ZipLoader.
The hopper allows small diameter parts (1/8” - 1/2”) to be loaded in quantity in a 3-1/2”h x 11-3/4” x 24-1/8”w box. The length of the part can be from approximately 2 inches, to 24 inches. The parts are then presented to the top of the knife in the ZipLoader, and loaded into the rear of the spindle for machining.
The hopper can be mounted to any ZipLoader.