Click image for PDF info
| Component | Description | Part Number | Price |
|---|---|---|---|
|
Belt Drive Spindle Encoder | 995-16-005 | $595 |
|
Encoder Belt, GT-75 & Attachements (except HLV) | 993-21-001 | $12 |
| Encoder Belt, GT-Jr | 593-21-001 | $12 | |
|
Encoder Pulley (Encoder side) | 995-22-001 | $60 |
|
Encoder Pulleys, Spindle Side | ||
| GT-75 & GT-Jr (ID=2.737") | 693-22-001 | $60 | |
| DSM, DV (ID=2.375") | 193-22-001 | $80 | |
| HSL (ID=2.810") | 093-22-002 | $60 | |
| HC, AHC, HNC (ID=1.875") | 293-22-001 | $60 | |
|
Encoder Cable | 995-07-003 | $44 |
Click image for PDF info |
Direct Mount Encoder, 5hp only (1/4" shaft) | 995-16-105 | $350 |
| Direct Mount Encoder, 5hp only (3/8" shaft) | 995-16-106 | Call | |
|
Old 5hp Motor Pulley Only (PolyVee) | 613-22-001 | $150 |
| Motor Pulley Kit, 5hp/C-Axis, GT-75/GT-Jr | 693-09-101 | $800 | |
| Motor Pulley Kit, 5hp/C-Axis, Attachment | 393-09-104 | $750 |
 |
PolyV 310J10 Belt | 633-21-001 | $36 |
| PolyV 290J10 Belt | 633-21-002 | $36 | |
| PolyV 300J10 Belt | 633-21-003 | $36 | |
| PolyV 360J10 Belt | 633-21-004 | $36 | |
| PolyV 380J10 Belt | 633-21-005 | $36 | |
 |
C-Axis Cog Type Spindle Drive Belt (pre-2001:slide s/n no "PTI") For GT-75 & GT-Jr (300H100) |
663-21-001 | $35 |
 |
Spindle Drive Belt 5hp/CAX (Herringbone Y-800) For GT-75 or GT-Jr |
693-21-001 | $125 |
 |
Dunham Collet Closer with drawtube | 693-08-200 | $2,175 |
| Dunham Collet Closer complete kit including pneumatics | 693-09-100 | $2,625 | |
|
Click image for PDF info 
|
Dunham Drawtube Locking Key Assembly | 693-08-210 | $80 |
|
Click image for PDF info 
|
Dunham Drawtube only | 693-08-211 | $350 |
|
Click image for PDF info 
|
Dunham Collet Closer Rebuild Kits | ||
| Dunham Seals Only (No disogrin drawtube seal) | 693-09-102 | $65 | |
| Dunham Bearings Only | 693-08-202 | $160 | |
| Bearing and Seals (No disogrin drawtube seal) | 693-09-103 | $225 | |
| Disogrin Drawtube Seal | 00602100A | $45 |
|
Click image for PDF info 
|
Standard Spindle Drives | ||
| GT-75/GT-Jr Standard 5hp Inverter | 914-16-004 | $795 | |
| Attachment Standard 5hp Inverter | 924-16-001 | $795 | |
 |
C-Axis Spindle Drives | ||
| Current C-Axis, w/exchange | 974-16-002 | $2,950 | |
| Baumuller C-Axis is obsolete Indramat C-Axis is obsolete |
|||
 |
Brake Resistor for 5hp Inverter (40 ohms 500W) |
914-15-001 | $195 |
| Brake Resistor for C-Axis Yaskawa (8.5 ohms 500W) |
974-15-001 | $195 | |
 |
Brake Resistor for C-Axis Yaskawa Short Cycle (8.5 ohms 1000W) |
974-16-003 | $350 |
| Brake Resistor for C-Axis Baumuller Short Cycle (15 ohms 1000W) |
954-16-003 | $350 | |
 |
Spindle Drive Circuit Card (spinpcb) w/exchange | 984-17-001 | $300 |
 |
New Spindle, complete, 4° Cam Lock w/exchange | 693-39-001 | $4,350 |
 |
Spindle Nose Cover Reduces Coolant Spray |
693-01-003 | $50 |
 |
Drawtube Plug For flood-coolant second-op jobs: prevents coolant from running out back of drawtube |
633-11-001 | $50 |
 |
Disconnect Switch Kit (Switch, shaft & operator) |
994-12-102 | $140 |
| Disconnect Switch only (6mm) | 994-12-001 | $75 | |
| Diconnect Operator only (6mm) | 994-12-002 | $40 | |
 |
Spindle Fault Reset Switch Assembly | 995-12-105 | $40 |
 |
Spindle Cabinet Keyswitch Assembly | 995-12-105 | $40 |
 |
Main Spindle Drive Fuse: 25 Amps | 995-15-003 | $10 |
| Coolant Pump Fuse: 2 Amps | 995-15-007 | $10 | |
 |
12VDC Icecube Relay (3-pole) (Used throughout older (TB1) spindle cabinets) |
999-15-005 | $20 |