Repair Parts: CNC Control Components Sep 2023

Component	Description
Part Number	Price
	New Generation (G4) CNC 5hp or C-Axis (with exchange)
915-16-101 (5hp) 965-16-101 (CAX)	$4,995
Click image for PDF info	LCD Monitor NOTE: To use LCD monitor with older motherboard requires ISA or PCI video card (VGA). These cards are no longer being made. Call for options. NOTE: G3 CNC must UPDATE SOFTWARE
995-16-019	$430
Click image for PDF info	Motherboard complete (G4 CNC) (with exchange) NOTE: MUST UPDATE SOFTWARE NOTE: Special cable 995-07-425 is necessary for some older motherboards in machines that have expanded I/O or a loader. Have your CNC serial number ready when you order to determine if you need this cable.
995-17-015	$525
Click image for PDF info	Motherboard complete (G3 CNC) We can no longer support this motherboard. You can probably find one that will work online: search "ISA motherboard Baby AT Micro ATX" Better yet, upgrade to G4 CNC.
Not Available	Not Available
	ATX Power Supply (G4 CNC)
995-16-020	$145
	AT Power Supply (G3 CNC)
995-16-009	$145
	USB Keyboard (G4 CNC)
995-16-025	$195
Click image for PDF info	PS1 / AT Keyboard (G3 CNC)
995-16-001	$175
Click image for more info	Auxiliary Power Supply Kit Install in older G3 CNC to provide higher 12VDC for more reliable collet-closer operation. Standard on newer G3 and all G4.
995-09-004	$75
	OmniTurn Servo Amp, w/exchange
995-16-007 (New) 995-16-007R (Recon)	$525 $300
	AMC Servo Amp, w/exchange Reconditioned (90 day warranty) For old-style G2 & G3 CNC
995-16-002	$300
	Copley Servo Amp, w/exchange Reconditioned (90 day warranty) For old-style G2 & G3 CNC
995-16-003	$300
Click image for PDF info	5AX Exchange Refurbished Complete with "Rabbit" micro-processor and ribbon cables (Motion Card for G4 CNC)
995-49-011	$700
	Motion Card for G3 CNC Exchange / Refurbished MC2 (5hp) or MC2-B (CAX Baum)
995-49-001 (5hp)	$1,000
995-49-004 (Baum)	$1,000
	Servo Motor Thermal Overload (G4 & late G3 CNC)
995-15-015	$25
	Thermal Overload w/Heater (refurb) (G3 CNC pre-2007)
995-15-017	$125
	W43 Heater Only (new) (G3 CNC pre-2007)
995-15-007	$50
	12VDC Relay (3-pole (Used everywhere except on latest spindle-drive circuit board))
999-15-005	$25
Click image for PDF info	USB Hard Drive (For G4 CNC)
995-09-006	$50
	Replacement Thumb Drive for G4 CNC (Provide SN of your CNC with order)
995-16-018	$25
	Solid-state IDE Hard Drive (for G3 CNC and earliest G4 w/ML MB)
995-09-003	$125
	Monochrome Video Card (For G2 or G3 w/Amber CRT Monitor)
995-17-009	$82
	Disk Controller I/O Card (For old-style G2 & G3 CNC)
995-16-004	$82
Click image for more info	OmniTurn Network Interface Kit (Specify G3 or G4)
990-39-100	$250
Click image for more info	USB Floppy Drive Emulator (Provides USB compatibility for legacy CNC) Inludes formatted thumb drive for program backup plus software to restore your harddrive.
995-16-022	$150
	Replacement formatted thumb drive.
995-16-023	$25
Click image for PDF info	Armature Relay Kit (For pre-1998 GT-75 only) Prevents slide movement if control is shut off w/o first engaging E-Stop. NOTE:If your Control On switch is Idec, cost is just $60
995-09-001	$100
	Current RS422 Converter (9-pin) for PLC
995-16-026	$40
	Legacy RS422 Converter (25-pin) for PLC
995-16-011	$77
	Connect Card (For G2 or G3 CNC)
995-17-002	$256
	Connect Card (w/Exchange) (For G4 CNC) Requires Pin Extractor
995-17-016 999-03-001	$350 $30
	OmniTurn Programming & Service Manual (Specify G3 or G4) Free download LEGACY (G3) manual Free download CURRENT (G4) manual
999-59-001	$50
	Pin Extractor (Required for removing pins from AMP connectors used on OmniTurn CNC)
999-03-001	$30

OmniTurn (541) 332-7004 • (541) 332-1018 sales@OmniTurn.com

Spindle